Single-Layer Color Wrap Vinyl for Vehicle Color Change

*The specifications above represent one available single-layer color wrap vinyl construction. Film thickness, adhesive structure, release liner and other specifications may vary by product grade and color series.

The main difference between single-layer color wrap vinyl and multi-layer constructions is the face-film structure.

Single-layer color wrap vinyl integrates the color pigments directly into one PVC face film, without a separate color layer or transparent protective top layer.

This simpler construction is suitable for vehicle wrap applications where customers require:

• Economical vehicle color change
• Simple PVC film construction
• General wrapping performance
• Partial vehicle styling
• Commercial vehicle color decoration
• Cost-sensitive automotive projects

For applications requiring a separate supporting base PVC layer, a 2-layer color wrap vinyl may be more suitable.

For applications requiring an additional transparent protective PVC layer, consider a 3-layer color wrap vinyl.

The final application result depends on the selected product grade, vehicle surface, installation method and service conditions.

Choose the film according to the vehicle application rather than color alone.

1. Confirm the Coverage Area

Determine whether the project is:

• Accent wrap
• Partial vehicle wrap
• Full vehicle wrap

2. Evaluate the Vehicle Shape

Flat panels require different film performance from deep curves, bumpers and recessed channels.

For complex vehicle surfaces, confirm the flexibility and conformability of the selected grade before installation.

3. Confirm the Required Appearance

Select the color and visual effect according to the final vehicle design, fleet color requirement or styling direction.

4. Review the Film Structure

A single-layer construction is suitable when a simple and economical vehicle color-change solution is preferred.

A 3-layer construction may be preferred when the project requires an additional transparent protective surface over the color layer.

5. Check Dimensional Stability

Review heat-shrinkage and other technical data when dimensional performance is important.

One representative single-layer construction has measured heat shrinkage of:

• MD: 0–0.5%
• TD: 0–0.4%

Product-specific values should be confirmed before ordering.

6. Test Before Bulk Application

Sample testing is recommended on the actual vehicle surface before large-scale installation.